10
MAINTENANCE
FILTER CARTRIDGE
Empty the collector filter when it gets full, is
recommended the use of an air compressor to
make a greater cleaning. To keep in optimal
function of your sander replace filter regularly.
SANDPAPER
Inspect the sandpaper. The use of worn-out
sandpaper will degrade efficiency and cause
possible damage to the pad, replace the sand-
paper as soon an excessive abrasion is noted.
MOUNTING SCREWS
Regularly inspect all mounting screws and en-
sure that they are properly tightened. Should
any of the screws be loose, retighten them
immediately. Failure to follow this instruction
could result in serious hazard.
VOLTAGE-FREQUENCY
SANDPAPER DIAMETER
ORBITS PER MINUTE
POWER
WEIGHT
120 V ~ 60 Hz
5” (127 mm)
9 000 - 13 000
240 W
1,9 kg
TECHNICAL DATA
LR905 manual.indd 10
25/02/16 3:07 p.m.
