Ursalink UG65 Quick Start Guide
www.ursalink.com
8
3.4 Gateway Mounting
The gateway can be mounted to a wall or a pole. Please complete all software configurations before
installation.
3.4.1 Wall Mounting
Preparation:
mounting bracket, bracket fixing screws, grounding screw, wall plugs, wall mounting screws and
other required tools.
1. Before you start, make sure that your SIM card has been inserted, your antennas have been attached and
all cables have been installed.
Note:
Do not connect device to power supply or other devices.
2. Align the mounting bracket horizontally to the desired position on the wall, use a marker pen to mark
four mounting holes on the wall, and then remove the mounting bracket from the wall.
Note:
The connecting lines of adjacent points are at right angles.
3. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the positions you
marked previously on the wall.
4. Insert four wall plugs into the holes respectively.
5. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws into the wall
plugs.
6. Screw the bracket fixing screws to the back panel of device, then hang the device to the mounting
bracket on the wall.
