UR75 User Guide
45
Figure 4-2-2-1
Figure 4-2-2-2
Item
Description
ACL Setting
Default Filter Policy
Select from "Accept" and "Deny".
The packets which are not included in the access control list will be
processed by the default filter policy.
Access Control List
Type
Select type from "Extended" and "Standard".
ID
User-defined ACL number. Range: 1-199.
Action
Select from "Permit" and "Deny".
Protocol
Select protocol from "ip", "icmp", "tcp", "udp", and "1-255".
Source IP
Source network address (leaving it blank means all).
Source Wildcard Mask
Wildcard mask of the source network address.
Destination IP
Destination network address (0.0.0.0 means all).
Destination Wildcard
Mask
Wildcard mask of destination address.
Description
Fill in a description for the groups with the same ID.
ICMP Type
Enter the type of ICMP packet. Range: 0-255.
ICMP Code
Enter the code of ICMP packet. Range: 0-255.
Source Port Type
Select source port type, such as specified port, port range, etc.
Source Port
Set source port number. Range: 1-65535.
Start Source Port
Set start source port number. Range: 1-65535.
End Source Port
Set end source port number. Range: 1-65535.
Destination Port Type
Select destination port type, such as specified port, port range, etc.
Summary of Contents for UR75 Edge
Page 1: ...UR75 User Guide 1 ...
Page 130: ...UR75 User Guide 130 Related Topic Upgrade ...
Page 142: ...UR75 User Guide 142 3 PPPoE ...
