FEATURES OF TOASTER
1. Bread rack
2. Bread rack control
3. Pull out crumb tray.
4. Electronic variable browning control
5. Reheat button
6. Frozen button
7. Cancel button
8. Carriage control lever
9. Variable width toasting slots.
OPERATING TOASTER
1. Insert the plug into a suitable mains supply socket
and turn the power on.
2. Place up to two slices of bread, muffins, or bagels
into bread slots.
3. Select the desired browning setting, from No.1 to
No.7 on the browning control knob.(No.1-lightest,
No.7-darkest).
When using the toaster for the first time we suggest
you toast on number 3. Varying types of bread
and personal preference may require a different
browning setting.
4. Press the carriage control lever down until it
clicks into place. Toasting cycle will automatically
commence. Please note: if the toaster is not plugged
in and switched on at the power point the carriage
control lever will not click into place.
5. The toaster turns off when the desired toast color
is achieved and automatically raises the toast. The
toasting process can be stopped at any time by
pressing the cancel button.
6. Use the bread rack to heat up rolls or other bread.
Place the bread on the top of the rack. Please note:
Do not heat up more than 2 items at a time. Select
browning setting and press the carriage control lever
down to switch on the toaster. Toasting cycle will
automatically commence
TOASTING FROZEN BREAD
To toast frozen bread, place the bread into the
bread slots and select the desired Browning Setting.
Press the carriage control lever down until it clicks
into place then press the Frozen Button.
REHEATING TOAST: The toaster allows you to
reheat toast without additional toasting. To reheat,
place toast into bread slots, lower the carriage
control lever until it clicks into place and press the
Reheat Button.
In the unlikely event that the bread or crumpet
becomes jammed, switch the toaster off at the power
outlet, remove the plug from the supply socket and
carefully ease the bread out of the toaster, ensuring
that you do not damage the element.
CARE AND CLEANING
1. Always turn the power off, remove the plug and
allow the toaster to cool before cleaning.
2. To remove any crumbs from the toaster, slide out
the crumb tray from under the toaster, empty and
replace in the toaster before using it again.
3. Wipe the outside of the toaster with a slightly
dampened cloth and polish with a soft dry cloth.
Do not immerse the unit in water.
4. To clean the interior, turn the toaster upside down
over the sink and shake crumbs free.
