motor is turned on. Do not
unfasten while appliance is in operation.
▶
Avoid contacting moving parts. Make sure the
motor stops completely before
disassembling.
▶
Do not place on or near a hot gas , or in a heated
oven.or in a dishwasher
▶
To disconnect, remove plug from the electric
outlet. Do not use the appliance
outlet. Do not use the appliance for use other than
intended or specified
purposes.
▶
Do not walk away from the appliance when it is in
operation.
▶
Do not disassemble the base.
▶
Do not put any foreign materials into the machine.
▶
Please do not use for more than 20 minutes at a
time, allow motor to cool.
Save these instructions
Technical Data
Rated Voltage: 220V-240V
Rated Power: 150W
Rated Frequency: 50/60Hz
Slow juicer components
Operation
The Slow Juicer is virtually assembled straight out of
the box. We suggest taking it apart and washing the
removable parts in warm water with non-abrasive liquid
detergent before the first use. Rinse thoroughly with
warm water and allow to air dry. This will eliminate any
traces of dust or residue from manufacturing or shipping.
Never submerge the Slow Juicer motor base in water or
any other liquid.
Assembly
1. Assemble the bowl to the base. (Figure 1)
a. Make sure the bowl fits all the way into the shell of
the base.
b. Align the arrow on the bowl with the arrow on the
base, twist clockwise slightly to lock. (Note: If the bowl
is not completely locked onto the base, the machine will
not start.)
2. Assemble the Strainer and Rotating Basket to the
bowl. (Figure 2)
a. Make sure the deep pit on the strainer basket lines up
with the red dot on the bowl.
3. Place the Auger in the center of the bowl. (Figure 3)
a. Twist the Auger clockwise until it drops into place.
4. Place the Food Chute onto the bowl.
a. Make sure the tilt-out triangle of the Food Chute is
aligned with the unlocked sign on the bowl. (Figure 4)
b. Turn the Food Chute clockwise until the lid clicks into
the locked position.
(The arrow on the Food Chute will line up with word
CLOSED on the motor base. (Figure 5)
Using the slow juicer
1. Once all parts are securely in place, connect the power
cord to an approved
power source.
2. Place one of the collectors under the pulp ejector, and
either a glass or the
other collector under the juice spout.
3. The Slow Juicer has 3 settings (Figure 6)
a. ON- this starts the motor for juicing.
b. OFF- this stops operation.
c. REV- this moves the Auger in the opposite direction.
4. Before placing food in the Slow Juicer, make sure all
foods have been
thoroughly washed, if food has to be peeled, there is no
need to wash. Also
make sure to cut all foods to an appropriate size so it
easily fits into the Food
Chute, we recommend no more than 3-inch pieces.
*Please make sure to
PUSHER
FOOD CHUTE
AUGER
STRAINER
ROTATING
BASKET
BOWL
PULT
EJECTOR
LOCKER
SWITCH
PULP
COLLECTOR
JUICE
COLLECTOR
BASE
JUICE
EJECTOR
