11
4. Install Pedals
5. Install the Battery
4.1
The left pedal
is marked with
"
L
".
4.2
The right pedal
is marked with
"
R
".
15mm wrench
15mm wrench
Use a 15mm wrench to tighten the left
pedal counterclockwise.
Use the same wrench to tighten the right
pedal clockwise.
5.1
5.2
Put the bottom of the battery into its
compartment first, and then press it down
fully.
The battery can be charged while
installed. Just remove the plug on the left
side of the down tube.
Press the power check button on the
battery and make sure enough power left:
blue is full, green is medium, red is low,
and flashing red is critical.
Notice