![background image](http://html.mh-extra.com/html/us-cutter/mh-series/mh-series_user-manual-and-assembly-instructions_1063325011.webp)
11
www.uscutter.com
425.481.3555
Insert the blade into
the top of the Blade
Carriage.
Installing the Pen Carriage
Loosen the locking knob
on the carriage arm.
Unscrew the top cap
from the pen carriage.
To replace the pen or spring inside of the pen carriage:
Place blade carriage
into the carriage arm.
Remove the top cap, the pen
and the spring. Replace the
pen and/or spring as necessary.
Tighten the locking knob
on the carriage arm.
Slide the spring onto the pen
from the top and insert it back
into the pen carriage.
1
1
2
2
3
3
Most new users will benefit from practice
“cutting” with the supplied pen carriage until
they are comfortable with normal operations of
the cutter and cutting software.
Your pen carriage should come assembled
and appear as it does in this image. If it does
not, please refer to the pen replacement
section below for assembly instructions.