![background image](http://html.mh-extra.com/html/us-cutter/mh-series/mh-series_user-manual-and-assembly-instructions_1063325017.webp)
17
www.uscutter.com
425.481.3555
Cut & Place Vinyl Like A Pro
www.uscutter.com
425.481.3555
GET EVERYTHING FOR YOUR
VINYL CUTTING NEEDS
Digital Printed
Graphics
Indoor Wall
Vinyl
Heat Press
Outdoor
Signage
Stencils &
Masks
You also need the right
media, blade, and
application tape to
ensure a professional job.
A good
VINYL CUTTER
is just the start...
Main Tape
GFX-341
45°
Blade
45°
Blade
Oracal 3951 & 3651
HP Gloss & Matte
Glass Application
45°
Blade
Oracal 8300, 8500,
8510, & 8800
Main Tape
GXF-775 or
R-Tape AT65
Main Tape
GXP750 or
Oratape HT55
Oracal 631 or
GreenStar Wall Vinyl
30° Blade
(general)
60° Blade
(glitter/flock)
EasyWeed
(standard fabrics)
EasyWeed Extra
(nylons/water resistant)
R-Tape
4076RLA
60° Blade
Anchor BlastLite
Oramask
GreenStar
Layflat Classic or
Main Tape
GXF-775
45° Blade
(general)
60° Blade
(reflective)
Oracal 651 or GreenStar
Intermediate (calendered)
for short term
Oracal 751 or 951 (cast)
for long term
CUT & PLACE VINYL LIKE A PRO
45°
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
60
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
60
The “workhorse blade” good
for most vinyl materials.
30°
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
60
60°
MEDIA
MEDIA
CARRIER
MEDIA
CARRIER
MEDIA
CARRIER
60
For use on thicker materials
and for highly detailed cuts.
Use sparingly to preserve
sharpness.
Best for thin materials
such as heat press vinyl.
Your blade depth should be set so
that the tip of the blade protrudes
about the distance of the width of
a credit card from the opening of
the blade holder. Test for the proper
depth setting by holding the blade
holder and manually trying to cut
through two sheets of paper. You
should only be able to cut
through the top sheet.