![background image](http://html.mh-extra.com/html/us-cutter/mh-series/mh-series_user-manual-and-assembly-instructions_1063325020.webp)
20
www.uscutter.com
425.481.3555
Feed the vinyl underneath the pinch rollers
(if working from a single sheet instead of
a roll, the vinyl can also be feed from the
front).
Adjust the pinch rollers so there is one roller located on each side of the
vinyl (and, on models with 3 or more rollers, one roller near the center).
Avoid lowering a pinch roller to the gap between the two feed rollers.
3
4