23
www.uscutter.com
425.481.3555
Now press the Origin button to tell the cutter that this is the
location where you would like the cut to begin.
4
When choosing a starting location for your design, remember that the process
will start in the bottom right area of the design. Please leave enough room to
the left of and behind the starting location to finish your cut.
If you would like to make other adjustments to the pressure, speed, or other
settings you can do so now. If you are setting up for your first cut with the
machine then the default values should be a good starting point.
If you make any adjustments to your cutter, make sure that you return to the
main screen before you attempt to cut.