15
11.Setup
11.1 Power On Time
Set the amount of time the controller waits for drives to perform
their individual diagnostics. Default is preferred.
11.2 Auto Start Time
Set the amount of time the duplicator waits for additional blank
media before automatically starting. You can set OFF, or to a
number of seconds (1 - 99). This function is used for: COPY,
TEST, VERIFY, COMPMARE, COPY&VERIFY, and
COPY&COMPARE.
11.3 Startup Menu
You can select which function on the menu displayed when you
first turn on the duplicator.
11.4 Display Mode
Choose between Basic and Expert displays on the LCD.
11.5 Button Beep
You can choose if you would like to hear a beep or not when you
press a button.
11.6 Skip Read Error
Turns off notifications when a master disc with too many read
errors is inserted.
11.7 Eject on Start
Choose which drives to eject when the tower is turned on.
11.8.Show Copy
Time
Displays the elapsed copy time after each burn.
11.9 Reader Speed
Change the speed at which the reader reads discs. Slower speeds
offer better throughput but take more time.
11.10 Compare
Speed
Changes the speed at which the disc’s contents are compared with
the HDD image of the disc.
11.11 CHG Bad
Master
This function allows the master disc to be replaced with an exact
copy of the same disc while copying. Very useful for badly
scratched master discs.
11.12 CD Overburn
Enables duplication of CD’s exceeding 79:59.
11.13 Copy CD-TEXT
Enable or Disable duplication of CD-TEXT discs.
11.14 Show HDD
Image Name
This option allows you to change the naming system of the images
stored on the Hard Disk Drive.
11.15 Boot
Password
Secure your duplicator against unauthorized use by enabling a
password when the tower is turned on.
11.16 Set Password
Set the boot-up password.
11.17 Language
Menu displays are available in English, Spanish, and Portuguese.
11.18 Clear Setup
Reset all of the options in the Setup menu to the factory default
settings.
