18
Note
3. COPY&VERIFY
This operation will make copies and after the copy process has been finished, it will continue on
and perform a Verification process to ensure data correctness. The Accutower duplicator will not
eject discs when copying is finished until verification has been done.
Use the
,
keys to get to 3.Copy & Verify. Before you press enter to start the procedures, please
make sure you have put correct reading source (master) and the correct blank discs (CDs or DVDs)
in the recorder drives.
The system will detect and display how many blank discs were detected and are ready for copying
and verifying. When the system is ready to go, just press Enter to begin CD/DVD verifying and
copying.
When the system starts the copying process, first it will start Loading Disc, analyzing the discs, and
then start copying. During the copying, the LCD screen will display Master Source Disc’s data size
and copying progress.
When finished, the system will continue to verify to make a disc Readability check.
When the verification is finished, the writer trays will eject.
4. COPY&COMPARE
This operation will make copies and after copy process has been finished, it will perform a
comparison process to ensure data correctness. Therefore, the duplicator will not eject discs until
discs comparison is finished.
a.
The system will detect and display how many blank discs were inserted.
b.
When the system is ready to copy, just press ENT to start copying.
c.
When finished, the system will perform a comparison process to ensure that the copied
discs are exactly the same as source disc.
When the comparison is finished, the Writer Trays will eject.
Copy & Compare makes a bit-by-bit comparison between Master Reading Source and all the
copied discs inside the writer tray. This operation is to ensure all of your copies have the exactly
same information as your Master Reading Source.
TEST does not guarantee successful recording because the actual laser
is not turned on, however TEST will catch major read errors and help
avoid losing media due to failed burns.
