:WLJPÄJH[PVUZHUKKPTLUZPVUZZ\IQLJ[[VJOHUNL^P[OV\[UV[PJL
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com |
www.usled.com
<7+(;,+
1. Turn off power to light pole at circuit breaker.
+YPSSULJLZZHY`OVSLZPU[VWVSLMVYÄ_[\YLTV\U[PUN-0.
3. Remove pole cap and lower nut plate inside of pole until threaded holes align with proper moutning holes.
(ZZLTISL[OYLHKLKYVKZPU[VU\[WSH[LHUKZSPKLVUNHZRL[ZHUKZWHJLYISVJR-0.
(MÄ_IHJROV\ZPUN[VWVSL\ZPUN^HZOLYWSH[LSVJR^HZOLYZHUKU\[Z-0.
/HUNSPNO[LUNPULHZZLTIS`VU[VIHJROV\ZPUN-0.
7. Make connections as required by the wiring diagram.
8. Rotate light engine assembly to closed position and secure using captive screws.
The installation must only be performed by a licensed electrician.
To prevent death, injury or damage to property, this product must be installed in accordance to National
Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
Disconnect power before installing the product or servicing it.
>HP[\U[PSÄ_[\YLOHZJVVSLKKV^UILMVYLPUZ[HSSPUNVYZLY]PJPUN[OLÄ_[\YL
INSTALLATION INSTRUCTIONS
FIG 1
QubeLot2
FIG 2
FIG 3
FIG 4
/VYPaVU[HSTV\U[PUNVUS`
