PPP over ATM (PPPoA)
MAC Encapsulated Routing (MER)
IP over ATM (IPoA)
Bridging
The ISP network operating mode depends on the service provider's configuration on the
Central Office side and Broadband Access Server (BRAS) for your ADSL line.
Your ISP should be able to provide the following, if needed:
VPI/VCI values
ADSL standard (Modulation)
Encapsulation mode
Authentication (PAP or CHAP), user name, and password for PPP connections
The following configuration considerations apply:
If the service provider provides PPPoE service, then the connection selection depends
on whether the LAN-side device (typically a computer) is running a PPPoE client or
whether the gateway is to run the PPPoE client. The gateway can support both cases
simultaneously. Consult your ISP instructions on the appropriate protocol to use.
NAPT and firewall features are always enabled when PPPoE or PPPoA mode is selected,
but they can be enabled or disabled by the user when MER or IPoA mode is selected.
NAPT and firewall are always disabled when Bridge mode is selected.
1. Go to the
Internet
menu and select
WAN Setup
.
2. Click
Add
to create a new PVC or
Edit
to modify an existing one.
第 2 頁,共 15 頁
U.S. Robotics Wireless MAXg ADSL Gateway User Guide
2005/7/4
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX05.609\wui_...