26
Fase 2.
(Seguire le istruzioni specifiche del sistema operativo in uso)
Utenti Windows 98FE:
Il CD-ROM include i driver per questi sistemi operativi. Individuare nel CD-ROM la cartella
contenente il driver necessario per il sistema operativo in uso.
Utenti Windows 98SE
Quando Windows rileva il nuovo hardware, fare clic su
Avanti
. Selezionare
Cerca il miglior driver
per la periferica
e fare clic su
Avanti
.
Inserire il CD di installazione nell'unità CD-ROM. Selezionare
Specificare un percorso
, digitare
D:\
e fare clic su
Avanti
. Se l'unità CD-ROM utilizza una lettera diversa, digitare tale lettera invece di
"D". Quando Windows rileva il driver, fare clic su
Avanti
.
Una volta completata l'installazione del driver, rimuovere il CD di installazione dall'unità CD-ROM,
fare clic su
Fine
e quindi su
Sì
per riavviare il computer. Dopo il riavvio del computer, la procedura
d'installazione è completata.
Utenti Windows 2000
Quando l'Installazione guidata nuovo hardware rileva U. S. Robotics 10/100/1000 Mbps PCI NIC,
fare clic su
Avanti
. Selezionare
Cerca un driver adatto alla periferica
e fare clic su
Avanti
.
Inserire il CD di installazione nell'unità CD-ROM. Selezionare solo
Unità CD-ROM
e fare clic su
Avanti
. Una volta trovati i driver corretti, fare clic su
Avanti
.*
Una volta completata l'installazione del driver, rimuovere il CD di installazione dall'unità CD-ROM
e fare clic su
Fine
. È possibile che venga richiesto di riavviare il computer. In tal caso, fare clic su
Sì
per riavviare il computer e completare la procedura di installazione.
Utenti Windows Me
Quando Windows rileva il nuovo hardware, selezionare
Specificare il percorso del driver
e fare
clic su
Avanti
.
Inserire il CD di installazione nell'unità CD-ROM. Selezionare
Supporto rimovibile
e fare clic su
Avanti
. Seguire le istruzioni visualizzate. Una volta rilevato il driver corretto, fare clic su
Avanti
.*
Una volta completata l'installazione del driver, rimuovere il CD di installazione dall'unità CD-ROM,
fare clic su
Fine
e quindi su
Sì
per riavviare il computer. Dopo il riavvio del computer, la procedura
d'installazione è completata.
Utenti Windows NT
Fare clic su
Avvio/Start, Impostazioni
e scegliere
Pannello di controllo
. Fare doppio clic su
Rete
, quindi fare clic sulla scheda Schede di rete. Fare clic su
Aggiungi
, quindi su
Disco driver
.
Inserire il CD di installazione nell'unità CD-ROM. Digitare
D:\WINNT4
e fare clic su
OK
. Se l'unità