13
1.
Open a faucet or spigot down stream of the filter. Slowly open the water shutoff valve and
let the filter system fill with water. Air will be pushed out of the filter through the open spigot
or faucet downstream. Once there is no air coming out of the faucet or spigot, turn the wa-
ter supply on fully and shut the faucet or spigot.
2.
Check for leaks. If there are no leaks the filter is installed and ready for service.
Filter Startup Instructions
Summary of Contents for 300-H-4510-BG-222-KIT
Page 3: ...3 System Dimensions ...
Page 4: ...4 System Dimensions ...
Page 5: ...5 System Dimensions ...