13
2.
Press
【
MC
】
key to display “weighing value of
accumulative total” on weight screen, “MR-ALL(times of
accumulative total)” on unit weight screen, “the number of
accumulative total” on count screen. Press
【
MC
】
key
again to clear all the accumulated information and cancel
accumulation operation.
3. Press continuously
【
ZERO
】
key to examine each
information of 10 times accumulated results in descending
order and press
【
MC
】
key to clear the present accumulated
information.
4. Press continuously
【
TARE
】
key to examine the information
of 10 times accumulated results in ascending order and
press
【
MC
】
key to clear the present accumulated results.
5. Press
【
R
ETURN
】
key to return to counting interface.
5.7 CHECK WEIGHT
Check Weight mode and check weight alarm range function
can be set under function setting mode. The setting
instructions are shown in the chapter of function settings.
Notice: the operation can only be performed when LO is less
than HI and more than 9d.