8
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
SPECIFICATION
Failure to observe the following warnings may result in physical injury and/or disease.
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
ALWAYS WEAR HEARING PROTECTION WHILE
OPERATING PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
ALWAYS WEAR EYE PROTECTION WHILE
OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST
PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
WEAR ANTI-VIBRATION GLOVES WHILE
OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF
DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL
AGENTS ACCORDING TO THE VALUES FOUND
IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE
SURVEY
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air. Excessively high pressure or humidity in supply air results in shorter life for
the mechanical parts and may damage the tool.
The air tool must be lubricated before storing. Follow the
“Lubrication” instruction with exception of step 3.
Always use an air line lubricator with this tool.
Do not over-oil and do not use heavy grade oil as stalling and
low performance may result.
Model
Square
Drive
Impact
Rate
Breakaway
Torque
Noise level (ISO 15744)
Vibrations
level
m/s
2
(ISO 28927-2)
Pressure
dB(A)
Power
dB(A)
mm
bpm
Nm
k*
k*
k**
928 AC1 1/2
13
1120
1490
90
3
101
3
5,2
1,5
* k = measurement uncertainty in dB
** k = measurement uncertainty in m/s²
Model
Average Air
Consumption
Working
Pressure
Weight
Dimensions
l/min
bar
kg
mm
928 AC1 1/2
147,2
6,2
2,8
190 x 70 x 193
1/4" NPT
Ø 10 mm
3/8 "
High flow
EMERGENCY
GATE VALVE
An air filter unit should be placed between air compressor and air lubricator
to promote clean air supply to the impact wrench Water, dirt, and scale can
damage the impact wrench .
Summary of Contents for 928 AC1 1/2
Page 54: ...NOTE ...
Page 55: ...NOTE ...
