Version 17.04.2012
DVB-MK-AUX
S
eit
e
13
4.
Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is permanently active without disturbing the navigation
performance.
4.2.
Selecting the usbLOGiC as current AV-source
Selecting the usbLOGiC as current AV-source is activated by pressing
the “MODE”-button (depending on the current mode of the system, it
has to be pressed several times). After the first activation the system
will switch the picture after a few seconds from usbLOGiC-video to
factory-video by itself, the audio will still sty on usbLOGiC-audio. Use
the picture switch button to select between factory-video and
usbLOGiC-video. You can leave the usbLOGiC mode by pressing the “FM” or the “MODE”
button.
Note:
The IR-control channel is preset to RC-Code 09 for the optional USB-AV-port (DVBU).
4.3.
Switching to internal USB and AV-source
In usbLOGiC mode longpress station button „
1
” to switch to the internal DVB-T tuner or
longpress station button “
2
” to switch to the AV-input mode.
4.4.
Picture settings
The usbLOGiC has its own picture setting mode. In order to
enter this mode, set to
“Video Set:ON“
in the “VI SETTINGS“
menu. After switching to the Video/Audio level the keys
"1 <> 4"
, "
2 <> 5"
, "
3 <> 6"
can be used for picture settings.
(each with short keypress).
You can deactivate the picture setting mode
in the “VI SETTINGS“ or by turning off ignition.
MODE - picture switch
button button
Contrast
Colour saturation
Brightness
