ZenCut Black User Manual
Accu-Aligning System
5-3
5.2.3 AAS II on ZenCut Black
There are three types of AAS II mark patterns: 4-Point Positioning, Segmental Positioning, and
Multiple Copies. Note that before print out your designs using inkjet printers, the registration
marks have to be created on your graphic designs by cutting software or the CorelDraw plug-in.
Hand-made marks or drawings won’t be reorganized by ZenCut cutting plotters. For more
details about registration mark setting in cutting software, please refer to ‘
Appendix A-3
:
CorelDraw Plug-In Instruction.”
1.
4-Point Positioning
This is the basic mark pattern that AAS II will auto detect: four registration marks and
contour cut images inside those marks.
Command: Esc.D1;(XDist);(YDist):
Layout: 4 L-shaped marks at the 4 corners around the design
2.
Segmental Positioning
In addition to 4 original points, intermediate registration marks are added on both X axis and
Y axis to help contour cut accurately, especially when cutting large images.
Command:
Esc.D2;(XDist);(YDist);(XStep);(YStep):
Layout:
In-between distance on X: 200~600mm (7.8in~23.6in), default 300mm (about 11.8 in)
In-between distance on Y: 200~600mm (7.8in~23.6in), default 300mm (about 11.8 in
3. Multiple Copies
This function is used to duplicate images so that you can cut multiple images at the same
time. The AAS II sensor will automatically scan registration marks for each individual image
to ensure the contour cutting precision.
Summary of Contents for ZENCUT Black
Page 1: ...V1 June 09 User Manual...
