Cold Press Juicer 27
CLEANING THE COMPRESSION
SILICONE RING:
TO REMOVE THE COMPRESSION RING:
1. Squeeze the ring from the top side and
push it down the juice chamber
2. Pull out the Compress silicon from the
bottom side of the juicing chamber.
Clean the compression ring using water.
1
1
2
2
3
3
ASSEMBLING THE COMPRESSION RING
ON TO THE JUICING BOWL:
1. After Cleaning the compression ring, hold
the ring on the top side, squeeze it and
insert into the center opening of the
juicing chamber from the top side.
Wipe away any residual water from
components after cleaning.
Before assembling the juicing bowl, ensure
that the compression silicone and silicone
ring are firmly inserted.
Note:
If the compression silicone
and silicone ring are not firmly
inserted, juice may leak from the
bottom of the juicing bowl.
