5
HOW TO FILL WATER IN THE TANK
1. Disconnect the iron from mains supply outlet.
2. Move the Steam Control Knob to position.
3. Fill water through the water inlet hole.
4. Fill up to the ‘Max’ level marked on the side of
water tank.
Note:
For best result, it is advisable to use de-mineralized water or distilled water. Do
not use chemically de-scaled water or any other liquids.
FIRST TIME IRONING
1. Remove any protective films or stickers from the sole plate and the cabinet.
2. Unwind and straighten the power cord.
3. Fill the water tank. (See How To Fill Water)
4. Connect the iron to a suitable mains supply outlet.
5. Turn the Temperature Dial in clockwise direction to maximum position; pilot light
glows.
6. Pilot light goes off when the required temperature is reached.
7. Move the Variable Steam Control Knob to position; steam starts coming out from the
holes in the sole plate.
8. Begin first time ironing with an old towel.
9. When the water tank is empty and there is no more steam produced; the preparation
work is completed. The iron is now ready for proper use.
SPRAYING FUNCTION
1. This function can be used any time
and is not affect any setting
2. Fill the water tank as described in
How To Fill Water.
3. Aim the nozzle to the garment.
4. Press the Spray Button.
Note:
It may be necessary to press the spray button a few times to start this function
Temperature Control Setting
•
Acetate
•
Elastsne
•
Polyamide
•
Polypropylene
•
Polyester
•
Silk
•
Triacetate
•
Viscose
•
Wool
•
Cotton
•
Linen
