6
DRY IRONING
1. Connect the iron to a suitable mains supply outlet.
2. Turn the Temperature Dial in clockwise direction; select (1 dot), (2 dots) or (3 dots)
according to the recommendation of garment label.
3. Pilot light glows indicating the iron is switched on.
4. When the required temperature is reached; pilot light goes off. The iron is ready for
use.
5. Move the Temperature Dial in anti-clockwise direction to ‘Min’; the iron is switched
off.
6. Disconnect the iron from mains supply outlet.
7. When the iron gets cool completely, store it vertically in a safe place
STEAM IRONING
1. Fill the iron as described in How to Fill Water.
2. Connect the iron to a suitable mains supply
outlet.
3. Turn the Temperature Dial in clockwise
direction to (3 dots) setting. (For optimum
steam quality, do not use 1 dot or 2 dots setting
for steam ironing)
4. Pilot light glows indicating the iron is switched on.
5. Pilot light goes off when the required temperature is reached.
6. The iron is ready for use.
7. Move the Variable Steam Control Knob to give the desired amount of steam.
8. Turn the Temperature Dial in anti-clockwise direction to ‘Min’; the iron is switched
off.
9. Disconnect the iron from mains supply outlet.
10. When the iron gets cool completely, store it vertically in a safe place.
Note:
Set the Variable Steam Control Knob to position after use.
BURST OF STEAM
This function provides extra amount of steam to
remove stubborn wrinkles.
1. Fill the iron as described in the section of How
To Fill Water.
2. Connect the iron to a suitable mains supply
outlet.
3. Turn the Temperature Dial to (3 dots) setting.
