7
4. Pilot light glows indicating the iron is switched on.
5. Pilot light goes off when the required temperature is reached.
6. The iron is ready for use.
7. Press the Burst Of Steam Button.
8. Steam will shoot from the holes of the sole plate into the fabric being ironed and
removing the wrinkles.
9. For stubborn wrinkles, wait a few seconds before pressing the Burst Of Steam
Button again. Most wrinkles can be removed within three presses.
Note:
It may be necessary to press the burst of steam button a few times to start this
function. For optimum steam quality, do not operate the Burst Of Steam more than three
times in succession.
BURST OF STEAM IN VERTICAL POSITION
Warning:
Do not apply steam on any clothes or fabrics that are
being worn by human or pets. Temperature of steam
is very high.
This function provides extra amount of steam to
remove wrinkles on delicate garments in hanging
position, hanging curtains, or other hanging fabrics.
1. Fill the iron as described in the section of How to Fill Water.
2. Connect the iron to a suitable mains supply outlet.
3. Turn the Temperature Dial to ‘Max’ setting.
4. Pilot light glows indicating the iron is switch on.
5. Pilot light goes off when the required temperature is reached. The iron is now ready
for use.
6. Hold the iron between 15 and 30 centimeters away from the garment.
7. Press the Burst of Steam Button once.
8. Steam will penetrate into the garment removing the wrinkles.
9. For Stubborn wrinkles, wait a few seconds before pressing the Burst of Steam
Button again.
10. Most wrinkles can be removed within three presses.
Note:
It may be necessary to press the burst of steam button a few times to start this
function. For optimum steam quality, do not operate the Burst Of Steam more than three
times in succession.
