![background image](http://html1.mh-extra.com/html/usl/jsd-100ma/jsd-100ma_manual_1064314019.webp)
Version 160624
Page 19
7.3
Windows JSD-100MA Installation
The JSD-100MA.exe user interface and SetIP.exe
applications are supported on Windows® XP,
Windows® 7, Windows® 8, or Windows® 10 operating
systems.
7.3.1 Windows Installer
The installation CD contains an electronic copy of the
user manual, Windows Setup application, and USB
drivers. When the CD is inserted into the drive on the
computer, an auto-run executable starts the installer.
When manually running the installer, launch the
Setup.exe as this contains setup conditions that are
required for proper application installation. This is
especially the case with Windows 10, an attempt to
install by invoking the setup.msi will result in an
installation error.
7.3.2 USB Driver Installation
Windows 10 USB driver signing and certification requirements for device drivers being installed on the
computer require selecting a mode that will bypass the signing requirement via the Advance Startup Options.
In addition to accessing the startup options, Bit Locker must be disabled. Access to Bit Locker settings can be
found by entering “Manage BitLocker” in the task bar search field. As a note BitLocker is only available in the
Windows 10 Pro edition.
The following are the steps required for Windows 10 to disable driver signature enforcement by accessing the
advance startup options.
Activate the Windows Start menu and select the Power item. When the
power options appear, hold the shift-key and then with the mouse
select the “Restart” option.
Windows will appear to shut down with the typical wait status displayed
and on restart the “Choose an option” menu is displayed.
Select the “Troubleshoot” menu item and then the “Advanced options.” The next menu group it will
contain the “Startup Settings” item that will then prepare the computer to restart with the settings
menu interface.