Page 12
3.3
DISPOSAL AND RECYCLING
Wheelie-‐Bin Symbol
The Wheelie-‐Bin symbol is attached to this product in compliance with the EU Directive
2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Its purpose is to
deter the improper disposal of this product and to promote reuse and recycling.
Proper Disposal
In conformance with the Directive, at end of life this product should be either sent to an
appropriate recycling facility for disassembly and recycling or returned to the supplier. Under
no circumstances should this product be deposited in a landfill for disposal.
Hazards of Noncompliance
Electrical and electronic products may contain chemicals which can leach into the groundwater
and cause health concerns through contaminated drinking water. Failure to dispose of this
product in compliance with the WEEE Directive may result in penalties as determined by local
ordinance.
Please contact your dealer or USL, Inc., with questions regarding the proper disposal of this or
any other USL product. USL, Inc. contact information: USL, Inc., 181 Bonetti Drive, San Luis
Obispo, CA 93401-‐7397, USA. Phone: +1 805 549 0161 Fax: +1 805 549 0163
www.uslinc.com
4.
System Version
The JSD-‐60 is continuously being improved. New features are added through
software/firmware updates and replacement of plug-‐in modules. This manual describes the
JSD-‐60 versions available at this writing.
Firmware/software versions for the systems described in this manual are listed in the table
below:
Component
Version
Graphical User Interface
(GUI)
2.1.1.25754
Main PIC
141208
Bootloader
141205
DSP
141014
Front Panel
140811