Page 64
9.
System Operation
The JSD-‐60 is controlled by the digital cinema server in most installations. Control is also
available from the front panel.
1.
USB Connector for communications. Select on the user interface
2.
COAX – Rear Panel RCA type connector for PCM or optional Dolby Digital® or DTS®
decoding.
3.
TOSLINK – An optical fiber connection for PCM or optional Dolby Digital® or DTS® decoding.
4.
8 CHANNEL DIGITAL – AES/EBU balanced line inputs.
5.
Option – allows the selection and configuration of any input and any settings.
6.
6 CHANNEL ANALOG – Balanced line inputs. Six channels (L, C, R, LFE, Ls, Rs) are fed through
the unit with appropriate delays and EQ.
7.
NON-‐SYNC – Two channel analog unbalanced line input. Input sensitivity may be adjusted.
8.
MIC – Public address balanced or unbalanced input. Input sensitivity and level may be
adjusted.
9.
MUTE – Mutes all outputs.
10.
Display – Indicates the fader level, format input and bar graph display of the output signal
levels.
11.
Fader – Controls the overall volume of all the channels.
12.
Power Indicator LEDs – Displays status of power supply voltages.
13.
Power Switch – On for normal operation, off for bypass operation.
