Convert Server User Manual
Jinan USR IOT Technology Limited
6 / 41
tec@usr.cn
�
Network
Network
Network
Network parameters
parameters
parameters
parameters
：
TCP,Server,8899,10.10.100.254;
�
IP:
IP:
IP:
IP:
10.10.100.254;
We just need to follow the parameters of the corresponding set of network communication parameters, you
can make serial <--> WIFI or Ethernet communication, the steps are as follows:
1.
Open test software USR-TCP232-Test;
2.
COM Settings area (left):
Choose COM port witch has connect the Convert Server, there is COM3, choose band rate to 57600, this is
the default band rate of Convert Server, Click Open COM port.
3.
Net Settings area (right):
Choose TCP client mode, Server IP write 10.10.100.254, it is the WIFI default IP address, Server port to 8899,
It is the default Port the Convert Server listen, Click Connect to link to the Convert Server.
Now, you can test send data between RS232 and WIFI.
COM port to WIFI: PC RS232 -> Convert Server RS232 -> Convert Server WIFI -> PC WIFI.
WIFI to COM port: PC WIFI or Ethernet -> Convert Server WIFI or Ethernet -> Convert Server RS232 -> PC
RS232.
Figure
Figure
Figure
Figure 4
4
4
4 serial
serial
serial
serial //// network
network
network
network transmission
transmission
transmission
transmission test
test
test
test
2.
2.
2.
2. Introduction
Introduction
Introduction
Introduction
2.1.
2.1.
2.1.
2.1. Short
Short
Short
Short Description
Description
Description
Description
Convert Server provides a serial port to WIFI function, can be RS-232/485 converted into a TCP/IP serial
network interface, RS-232/485 serial port and WIFI/ Ethernet bidirectional data transparent transmission. The
serial device can immediately with the TCP/IP network interface functions, connect to the network for data
