![background image](http://html.mh-extra.com/html/usr-iot/usr-c321/usr-c321_user-manual_1064569031.webp)
USR-C321
Low Power
Minisize
WiFi Module User Manual
31
31
31
31
/
41
41
41
41
27
UARTTE
Set/query a serial port free framing intervals
28
SLPTYPE
Set the sleep mode
1) AT+ENTM
�
Function:
Exit the command mode, enter the translate mode;
�
Format:
�
Set
AT+ENTM<CR>
AT+ENTM<CR>
AT+ENTM<CR>
AT+ENTM<CR>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
�
Parameters:
无
After the command is executed correctly, module from the command mode switch
to translate mode.
2) AT+E
�
Function:
Set/query module echo the at command set
�
Format:
�
Query
AT+E
AT+E
AT+E
AT+E <CR>
<CR>
<CR>
<CR>
<CR><LF>+OK=<on/off><CR><LF>
<CR><LF>+OK=<on/off><CR><LF>
<CR><LF>+OK=<on/off><CR><LF>
<CR><LF>+OK=<on/off><CR><LF>
�
Set
AT+E=<on/off><CR>
AT+E=<on/off><CR>
AT+E=<on/off><CR>
AT+E=<on/off><CR>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
�
Parameters:
�
on:Open the echo, echo the AT command input command, off: the AT
command mode, type the command does not echo.
3) AT+Z
�
Function:
Restart the module Format:
�
Set
AT+Z<CR>
AT+Z<CR>
AT+Z<CR>
AT+Z<CR>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
<CR><LF>+OK<CR><LF>
�
Parameters:
none
After the command is executed correctly, restart the module.
4) AT+CFGTF
�
Function:
After the command is executed correctly, restart the module.
�
Format:
�
Set
AT+CFGTF<CR>
AT+CFGTF<CR>
AT+CFGTF<CR>
AT+CFGTF<CR>
<CR><LF>+OK=<status><CR><LF>
<CR><LF>+OK=<status><CR><LF>
<CR><LF>+OK=<status><CR><LF>
<CR><LF>+OK=<status><CR><LF>
�
Parameters:
�
status:Returns the operating status;
�
SAVED:Set up the success
�
NON-SAVED:Setup failed
5) AT+RELD
�
Function:
Recovery module configuration parameters for the user the factory
configuration parameters
�
Format: