USR-G808 User Manual
Technical Support:
Jinan USR IOT Technology Limited
www.usriot.com
16
Enable
Choose the DDNS function
Default disable, users can
choose to enable
Event interface
Choose the WAN port according your requirement
E.g.choose wan_wired
Service /URL
Fill the DDNS server address
Format:
http://username:password@ddns.oray.com/ph/updat
e?hostname=domainname
E.g.
http://ouclihuibin123:ouc
lihuibin1231@ddns.oray.c
om/ph/update?hostname
=1a516r1619.iask.in
Domain name
Fill the domain name you apply
E.g. 1a516r1619.iask.in
Username
Username
E.g. ouclihuibin123
Password
Password
E.g. ouclihuibin1231
IP original
Choose the interface here
Select interface
Interface
Name of the interface
E.g. choose eth0.2 here,
(wired WAN port)
Check
the
interval of the IP
changing time
Check the interval for IP changing for IP might
changing commonly. The value is smaller and the
check will be more frequency
E.g. 1 min
Forced
update
interval
Forced upgrade interval
E.g. 72min
Form 3.2.1-2 Parameters for DDNS
Check the DDNS work or not( restart the router to make it work)
Check your public IP
Then ping the domain name:1a516r1619.iask.in on the PC, if it is ok, the DDNS can be work
Function feature
User should choose ‘Enable’ on above figure to enable DDNS function at first
Reset G808 to make new parameters take effect.
Fill in the parameters strictly, make sure the accuracy of them like: service/URL, domain name, user name,
password and the interface.
Even though the router under the subnet,this function can enable dynamic domain name
DDNS+port mapping can enable that remote access the subnet under the local router.
Add more than one DDNS domain name.
3.2.2. WIFIdog
Have the device enter the external net. Then the first time for the device to enter the external net, login a
certification webpage and do the certification.
The sense for WIFIdog:
①
to keep the safety of the LAN, record the illegal behaviors such as net attack when using
the public net.
②
using in the advertisement. Collecting the information of he users under the router if they allow
which is convenient for factories to promote.
Note: default disable, please enable it at first
