USR-G808 User Manual
Technical Support:
Jinan USR IOT Technology Limited
www.usriot.com
45
Advanced settings please refer to PPTP
3.2.13. Static Routes
Here are some parameters for the static router.
Name
Means
备注
Interface
The port for router rule perform
eth0.2(wired WAN port)
Remote address
The address of the destination you
want to access
192.168.1.0
Subnet masks
The
subnet
masks
of
the
destination to access
255.255.255.0
Gateway
The address to transport
192.168.0.202
Metric
Number of packet jumps
Fill 0
MTU
The max transmission
1500
Form 3.2.13-1 Static Router Parameters
Static router describe the data package router rule on the Ethernet.
Static router using the application
Testing environment, two router A and B, like the diagram:
Diagram 3.2.13-1 Static Router List.
Both the WAN of the A and Bin the net of the 192.168.0.0, the LAN port of the router A is subnet:192.168.2.0, and
router B is 192.068.1.0.
The create a route on the router A, so when we access the 192.168.1.X, then transfer to router B.
Set the static route on the A
