Convert Server User Manual
www.usriot.com
Jinan USR IOT Technology Limited
39 / 44
tec@usr.cn
LAN IP address: 10.10.98.254 (Different net segment with WAN port);
--See “AP Interface Setting Page”
Figure 34
Two Convert Servers Connection Through AP
Q6: How to avoid IP address confliction when apply Convert Server?
The following address allocation method can avoid the IP address confliction for dynamic and static IP
address mixed application.
Convert Server dynamic IP address range from 100 to 200 for last IP address segment.
Such as default IP: 10.10.100.254. When Convert Server works as AP, the IP address Convert
Server can allocate to STA is from 10.10.100.100 to 10.10.100.200;
So, if user needs to set static IP for dedicated STA internal network, the available IP address range
can start from 10.10.100.1 to 10.10.100.99.
Q7: PC works as server, all Convert Servers works as data acquisition card
and connect with PC, how to configure this application?
Network structure as below figure: Three Convert Server setup 3 TCP links with PC server. Convert Server 1#
works as AP and all devices connect to Convert Server 1# through WiFi interface;
