background image

© 2021 United States Stove Company

3

INSTALLATION CHECKLIST

Your stove should be installed by a qualified installer only. An NFI qualified Installer can be found at 

www.nficertified.

org/public/find-an-nfi-pro/

CUSTOMER SERVICE

1-800-750-2723 ext 5050

Text to 423-301-5624

Email to: Customerservice@usstove.com

COMMISSIONING CHECKLIST

This checklist is to be completed in full by the qualified person who installs this unit. Keep this page for future reference.
Failure to install and commission according to the manufacturer’s instructions and complete this checklist will 

invalidate the warranty.

Please Print

Customer Name:

Telephone Number:

Address:
Model:
Serial Number:
Installation Company Name:

Phone Number:

Installation Technician’s Name:

License Number:

DESCRIPTION OF WORK

Location of installed appliance:  __________________________________________________________________________________

Chimney System: New Chimney System        Yes        No    If yes, Brand _________________________________________

If no, Date of inspection of the existing chimney system: __________________________________________________________

COMMISSIONING

Confirm hearth pad installation as per installation instructions ....................................................................................................
Confirm proper placement of internal parts ..........................................................................................................................................
Check soundness of door gasket and door seals .................................................................................................................................
Confirm clearances to combustibles as per installation instructions in this manual ..............................................................
Check the operations of the air controls .................................................................................................................................................
Confirm all flue pipe and chimney system are secure and sealed ..................................................................................................
Confirm the stove properly drafts when fired .......................................................................................................................................
Check to ensure a CO alarm is installed as per local building codes and is functional ............................................................
Explain the safe operation, proper fuel usage, cleaning and routine maintenance requirements ........................................

Declaration of Completion: As the qualified person responsible for the work described above, I confirm that the appliance 

as associated work has been installed as per manufacturer’s instructions and following any applicable building and 

installation codes.

Signed: ______________________________________ Print Name: __________________________________Date: ______________

Home Owner: RETAIN THIS INFORMATION FOR FUTURE REFERENCE

Summary of Contents for 1869













Reviews: