User Manual & Installation Guide
UTAH-100/X SD Series
3264-User10.doc
Date: 2009-10-26, Rev. 1.0
6
GENERAL DESCRIPTION
The UTAH-100X16SD Compact HD/SDI Router
fully complies with the relevant standards for SD-
formats. With adaptive cable equalizers, signal re-clocking, cable drivers and multi-sync reference
switching these routers are well suited for OB vans and all other digital Broadcast and Telecom routing
and distribution systems. Having both an Ethernet SNMP/HTTP/SanEth) and DSUB9P RS-232 interface
for remote control and configuration makes it very adaptable to any 3rd party control system.
The UTAH-100X16SD is delivered in four models:
Model UTAH-100X16SD
: 16x16 with 16 LEDs for signal presences in the front.
Model UTAH-100X16SDCP
: 16x16 with Push Buttons in the front 16 for outputs selection and 16
for input selection.
Model UTAH-100/X8SD
: 8x8 with 8 LEDs for signal presences in the front.
Model UTAH-100/X8SDCP
: 8x8 with Push Buttons in the front, 8 for outputs selection and 8 for
input selection.
All units are delivered with one standard off-the-shelf universal AC/DC Power Supply. Two
independent power inputs are provided to enable redundant supplies.
The 19” wide, 1RU high and 60 millimetres deep frame houses the switch, local control unit and RS-232
and Ethernet remote control interface. Two 12 VDC 2.1mm power input connectors enable use of
redundant power supplies.
UTAH-100X16SD
UTAH-100X16SDCP
UTAH-100/X8HD
UTAH-100/X8HDCP
