User Manual & Installation Guide
UTAH-100/X HD Series
3213-User10.doc
Date: 2009-10-07, Rev. 1.0
6
GENERAL DESCRIPTION
The UTAH-100/X16HD Compact HD/SDI Router
fully complies with the relevant standards for SD-,
HD- and 3G-SDI (SMPTE 259M, 292M and 424M) formats. With adaptive cable equalizers, signal re-
clocking, cable drivers and multi-sync reference switching these routers are well suited for OB vans and
all other digital Broadcast and Telecom routing and distribution systems. Having both an Ethernet
SNMP/HTTP/SanEth) and DSUB9P RS-232 interface for remote control and configuration makes it very
adaptable to any 3rd party control system.
The UTAH-100/X16HD is delivered in four models:
Model UTAH-100/X16HD
: 16x16 with 16 LEDs for signal presences in the front.
Model UTAH-100/X16HDCP
: 16x16 with Push Buttons in the front 16 for outputs selection and 16
for input selection.
Model UTAH-100/X8HD
: 8x8 with 8 LEDs for signal presences in the front.
Model UTAH-100/X8HDCP
: 8x8 with Push Buttons in the front, 8 for outputs selection and 8 for
input selection.
All units are delivered with one standard off-the-shelf universal AC/DC Power Supply. Two
independent power inputs are provided to enable redundant supplies.
The 19” wide, 1RU high and 60 millimetres deep frame houses the switch, local control unit and RS-232
and Ethernet remote control interface. Two 12 VDC 2.1mm power input connectors enable use of
redundant power supplies.
UTAH-100/X16HD
UTAH-100/X16HDCP
UTAH-100/X8HD
UTAH-100/X8HDCP
