BX7000
can be used to control devices using two control modes,
comprising the
IR (Infrared)
and the
RF (Radio Frequency)
control
mode.
BX7000
is designed to choose between IR and RF control modes
according to the situation to allow control of various devices.
All devices are set up by default to work with IR signals. To be able to
operate one or more devices with RF signals, you have to change the
BX7000
‟s IR/RF settings for those devices.
1
Press
[IR/RF]
button on the “Device Setup” menu screen.
☞
Caution !
[IR / RF]
menu is not in a diffusion model.
2
If you would like to setting control mode with each Device button,
press
[Control Device Button]
.
If you would like to setting control mode with each Remote Control
button, press
[Control Remote Control Button]
.
Note
.
This explains „Control Remote Control Button‟ method. „Control Device
Button‟ method is similar to the „Control Remote Control Button‟ method,
except that Relay and Serial setup are not available.
3
Select and press a Device button on “Device Home” for setting IR/RF
its Remote Control button. You will be directed to the selected
device‟s 1
st
Remote Control page.
Note
1. To move between pages, and find a device button, use the
[
◀
,
▶
]
button.
2. To exit from the “Device Home” screen, press the
[Exit]
button.
4
Select and press a Remote Control button for setting IR/RF.
You will be directed to “Remote Control Button IR/RF” setting screen.
5
On the “Remote Control Button IR/RF” setting screen, select a
control method button.
Selected button will become highlighted, and the
[+]
and
[-]
buttons
will be activated.
Use the
[+]
and
[-]
buttons to set up the control method.
After setting up the control method, press the
[Next]
button.
IR / RF
51
☜
☞
