■
Instructions of Control Method Button
①
Control
: Select a control signal output method between
IR
and
RF
methods. Only RF method allows setup for the remaining
setups.
②
ID
: Individual ID is granted for each Device or each Remote Control
button in order to prevent unwanted devices to operate if there
are several identical devices. There are total 16 RF IDs whose
names are composed of numbers from 0 to 9, and alphabets
from A to F.
③
Channel
: Setup a proper channel in order to prevent frequency
interception if using a product with RF control method
nearby. There are total 16 RF IDs whose names are
composed of numbers from 0 to 9, and alphabets from A
to F. We recommend using E or F channel.
④
Method
: RF receiver outputs signals in three methods:
[IR]
,
[Relay]
,
and [Serial]
.
Note
1. RELAY and SERIAL methods control a certain device using a port of
RF receiver itself through wire.
2.
[IR]
,
[Relay]
, and
[Serial]
setups need support from RF receiver for use.
52
