LMC100A Installation
– WC1000
3
■
System Configuration with WC1000 Touch Panel
■
WC1000 Network Configuration
①
It is the way to form the network when using WC1000 Touch Panel(Or PC Integrated
Control Program). Input IP address of LMC100A which is received the order in the
corresponding button of WC1000 in order to send the specific button's instruction to
LMC100A in the WC1000. (Refer to the WC1000 User Manual how to input)
②
The instruction sent to WC1000 is delivered to LMC100A thru Wi-Fi network.
The instruction in LMC100A changes LAN to RF signal and send it to the RF controller
like IRE200A or RLE400A.
③
We call the LMC100A a 'Server' which can be used LAN to RF. You need to register the
unique local IP in each LMC100A when used a server. (Refer to the page 7 for registering)
④
To use LMC100A, the location where it is to be installed needs to consist of one network.
In other words, total system needs to be interconnected using one IP Router.
⑤
As there are four LAN ports in one basic IP Router, one Router can control 4 multi-zones.
To control more than 4 multi-zones, LAN ports need to be increased using switch herb.
⑥
As many LMC100A can be installed as number of IP. As IP Router basically supports
about 200 IPs, LMC 100A can control about same number of IPs with networks.
www.utas.co.kr
WC1000
Wi-Fi
Server
LMC100A
RF Signal
LAN Cable
RF Controller
Wi-Fi
Router
LMC100A
in other place
