30
⑦ Add Relay Action( ) :
To add relay action.
a. Open :
To continuously connect the open relays
b. Close
:
To open the closed relays
.
c. Trigger :
To close the open relays for a
predetermined period of time. This function is
commonly used in most relay functions. 250ms is
set as default.
e. Select Port :
To select the Extender Port to which
the device is connected.
f. Select Extender :
To select the Extender to which
the device is connected.
d. Toggle :
To toggle between relay status.
Select
Action
Select
Port
Select
Extender
⑥ Add RS Action( ) :
To add RS232/485 functions.
a. Setting :
Set the communication methods (such as
Baud Rate, Date Bits, Parity, Stop Bit) as same as
the controller.
b. Command :
Enter the code of the button to be
controlled. Select either ASCII or HEX.
c. Select Extender:
Select the Extender to which the
device is connected.
d. Select Port:
Select the Port of Extender to which the
device is connected.
※ Please refer to the manufacturer‟s
information on communication methods
and control codes.
⑧ Add Channel Macro Action( ) :
To enter a
particular channel globally on the device that has
numerical data (such as TV with Digit 0, Digit 1,
Digit 2 and etc)
a. Add Device to Device Library:
To add devices
with numeric data, and to setup Action to such
devices, to My Database
b. Device :
To select a device to control
c. Channel Number :
To enter a channel number to
select
d. Delay :
To set the delay time between the
numeric data during executing Macro
※ You cannot use a device that has no numeric
data.
Select
device
to
control
Enter
channel
number
Set Delay
time
