Utax 2550ci User Manual Download

Page: 77 / 530

Preparation before Use

2-29

Loading Paper in the Cassettes

The standard cassettes

The 2 standard cassettes will each hold plain paper, recycled paper or color paper.
Cassette 1 and 2 hold up to 500 sheets of plain paper (80 g/m

) (or up to 550 sheets of 64 g/m

plain paper).

The following paper sizes are supported: A3, B4, A4, A4-R, B5, B5-R, A5-R, Ledger, Legal, Oficio II, Letter,

Letter-R, Statement-R, Folio, 8K, 16K, 16K-R and 216 × 340 mm.

Pull the cassette out toward you until it stops.

Squeeze the ends of the bottom of the paper length
guide and move the guide to fit the length of the
paper.

IMPORTANT:

• When using media types other than plain paper (such as recycled or colored paper), always specify the

media type and paper weight settings. (Refer to

Specifying Paper Size and Media Type for the

Cassettes on page 2-36

Media Type Setting on page 9-8

The cassettes can hold paper with weights between 60 and 256 g/m

. If you are using a paper weight

between 106 and 256 g/m

, set the media type to

Thick

and set the weight of the paper you are using.

• If the size of the paper being loaded is Oficio II, 8K, 16K,16K-R, or 216×340 mm, be sure to set the paper

size. (Refer to

Specifying Paper Size and Media Type for the Cassettes on page 2-36

Media Type

Setting on page 9-8

• If you wish to use 330 × 210 mm to 356 × 220 mm paper, contact a service technician.

NOTE:

Do not pull out more than one cassette at a

time.

NOTE:

Paper sizes are marked on the cassette.

NOTE:

When using 11 × 17" (ledger) paper, lay the paper length guide down flat.

Summary of Contents for 2550ci



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2550ci

Reviews:

Related manuals for 2550ci

Brands by name

Popular brands

Utax 2550ci, User Manual

Search results

Summary of Contents for 2550ci

Reviews:

Related manuals for 2550ci

Brands by name

Popular brands