3-17
Sending Faxes > Duplex
Duplex
Select the type and orientation of the binding based on the original.
FAX TX Resolution
Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
Density
Adjust density.
Adjust density selecting [
-4
] (Lighter) to [
+4
] (Darker).
Item
Value
Description
1-sided
―
Disables the function.
2-sided
―
Set when using a 2-sided sheet original that will be bound on
the left or right.
Others
Duplex
1-sided,
2-sided (Binding Left/Right),
2-sided (Binding Top)
Select the binding orientation of originals.
Original
Orientation
*
*
Displayed when [
2-sided (Binding Left/Right)
] or [
2-sided (Binding Top)
] is selected in "Duplex".
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to
scan correct direction.
Item
Description
400 × 400 dpi Ultra
when sending originals with minute characters
and lines more finely
Typical character size: 6 point
(example:
Resolution
Resolution
)
200 × 400 dpi Super
when sending originals with minute characters
and lines
Typical character size: 6 point
(example:
Resolution
Resolution
)
200 × 200 dpi Fine
when sending originals
with relatively small characters and thin lines
Typical character size: 8 point
(example:
Resolution
Resolution
)
200 × 100 dpi Normal
when sending originals with standard size
characters
Typical character size: 10.5 point
(example:
Resolution
Resolution
)
NOTE
The default setting is [
200 × 100 dpi Normal
]. The higher the resolution, the clearer the image, but the fax
transmission time is longer.
