5-24
Using Convenient Fax Functions > Encryption
Using the Encrypted Transmission
When sending originals by encrypted transmission, use the Address Book registered for encryption or set encrypted
transmission when dialing directly using the numeric keys.
1
Register the encryption key ahead of time.
Register the encryption key that you decided upon with the recipient.
For the procedure for registering an encryption key, refer to the following:
2
Select [FAX] on the Home screen.
3
Place the originals.
4
Specifying destination.
Select [
Add Dest.
] and enter the fax number of the other party.
5
Turn on encrypted transmission.
1
[
Detail Settings
] > [
Encrypted Transmission
] > [
Encryption
] > [
On
] >
[
Encryption Key No.
]
2
Select the encryption key number that you used to register the encryption key that you
decided upon with the recipient.
For the procedure for registering an encryption key, refer to the following:
6
Select the encryption box.
If you need to select an encryption box, set the box.
1
[
Encryption Box
] > [
On
] > [
Encryption Box No.
]
2
Enter the box number (0000 to 9999) with the numeric keys.
3
Select [
OK
].
7
Finish the encrypted transmission settings.
[
OK
] > [
OK
] > [
OK
]
NOTE
Encrypted transmission can be also used in broadcast transmission. With encryption
communication, you cannot conduct sub address transmission.
Registering an Encryption Key (page 5-22)
NOTE
When encrypted transmission has been set to a destination in the Address Book or One
Touch Key, you can use the destination.
