manualshive.com logo in svg

Utax CD 1030, Instruction Handbook Manual

The Utax CD 1030 is a high-quality multifunctional printer with cutting-edge features. Ensure seamless setup and operation with the free Instruction Handbook Manual available for download from our website. This comprehensive manual covers everything you need to know about the product, empowering you to make the most of its capabilities.

Share
Download
background image

1-3

 CAUTION

• DO NOT pull the power cord when removing it

from the outlet. If the power cord is pulled, the
wires may become broken and there is a danger
of fire or electrical shock. (ALWAYS grasp the
power plug when removing the power cord from
the outlet.) ............................................................

• ALWAYS remove the power plug from the outlet

when moving the copier. If the power cord is
damaged, there is a danger of fire or electrical
shock. ...................................................................

• If the copier will not be used for a short period of

time (overnight, etc.), turn the power switch OFF
(O).
If it will not be used for an extended period of
time (vacations, etc.), remove the power plug
from the outlet for safety purposes during the
time the copier is not in use. ................................

• ALWAYS hold the designated parts only when

lifting or moving the copier. ..................................

• For safety purposes, ALWAYS remove the power

plug from the outlet when performing cleaning
operations. ...........................................................

• If dust accumulates within the copier, there is a

danger of fire or other trouble. It is therefore
recommended that you consult with your service
representative in regard to cleaning of internal
parts. This is particularly effective if accomplished
prior to seasons of high humidity. Consult with
your service representative in regard to the cost
of cleaning the internal parts of the copier. ..........

■

Cautions when using the copier

 WARNING

• DO NOT place metallic objects or containers with

water (flower vases, flower pots, cups, etc.) on or
near the copier. This of situation presents a
danger of fire or electrical shock should they fall
inside. ...................................................................

• DO NOT remove any of the covers from the

copier as there is a danger of electrical shock
from high voltage parts inside the copier. ............

• DO NOT damage, break or attempt to repair the

power cord. DO NOT place heavy objects on the
cord, pull it, bend it unnecessarily or cause any
other type of damage.
These types of situations present a danger of fire
or electrical shock. ...............................................

• NEVER attempt to repair or disassemble the

copier or its parts as there is a danger of fire,
electrical shock or damage to the laser. If the
laser beam escapes, there is a danger of it
causing blindness. ................................................

• If the copier becomes excessively hot, smoke

appears from the copier, there is an odd smell, or
any other abnormal situation occurs, there is a
danger of fire or electrical shock. Turn the power
switch OFF (O) immediately, BE ABSOLUTELY
CERTAIN to remove the power plug from the
outlet and then contact your service
representative. .....................................................

• If anything harmful (paper clips, water, other

fluids, etc.) falls into the copier, turn the power
switch OFF (O) immediately. Next, BE
ABSOLUTELY CERTAIN to remove the power
plug from the outlet to avoid the danger of fire or
electrical shock. Then contact your service
representative. .....................................................

• DO NOT remove or connect the power plug with

wet hands, as there is a danger of electrical
shock. ...................................................................

• ALWAYS contact your service representative for

maintenance or repair of internal parts. ...............

 PRECAUTIONS FOR USE

Summary of Contents for CD 1030

































































































































































































































































































Reviews:

No comments

Related manuals for CD 1030

Fenix Imvico TK41 Operation Manual preview
TK41
Brand: Fenix Imvico Pages: 88
IBM InfoPrint 6500 User Manual preview
InfoPrint 6500
Brand: IBM Pages: 334
IBM 6400 Series Maintenance Manual preview
6400 Series
Brand: IBM Pages: 428
IBM 6400 Series Setup Manual preview
6400 Series
Brand: IBM Pages: 316
IBM 5400-006 Setup Instruction preview
5400-006
Brand: IBM Pages: 210
TallyGenicom 6600 Series Quick Reference Manual preview
6600 Series
Brand: TallyGenicom Pages: 310
TallyGenicom 6600 Series Applications Manual preview
6600 Series
Brand: TallyGenicom Pages: 330
Océ VarioPrint 1055 User Manual preview
VarioPrint 1055
Brand: Océ Pages: 194
Oce CS9360 Installation Manual preview
CS9360
Brand: Oce Pages: 12
VASTEX E-1000 Assembly And Operation Instructions Manual preview
E-1000
Brand: VASTEX Pages: 15
Varitronics VariQuest Perfecta 2400STP User Manual preview
VariQuest Perfecta 2400STP
Brand: Varitronics Pages: 227
Samsung CLP-775ND Service Manual preview
CLP-775ND
Brand: Samsung Pages: 134
Canon ColorWave 3800 Operation Manual preview
ColorWave 3800
Brand: Canon Pages: 358
Canon imageRUNNER ADVANCE DX C478iZ Faq Manual preview
imageRUNNER ADVANCE DX C478iZ
Brand: Canon Pages: 208
Canon imageRUNNER ADVANCE DX C477iFZ Faq Manual preview
imageRUNNER ADVANCE DX C477iFZ
Brand: Canon Pages: 92
Ricoh MP 2554SP Series Configuration Manual preview
MP 2554SP Series
Brand: Ricoh Pages: 1
Xerox WorkCentre WC7545 Finisher Install Manual preview
WorkCentre WC7545
Brand: Xerox Pages: 8
Lexmark 5470 - X Color Inkjet User Manual preview
5470 - X Color Inkjet
Brand: Lexmark Pages: 202

Brands by name

Popular brands

Load more brands