Utax CD 1242 Instruction Handbook Manual Download

Page: 274 / 424

Default Setting (System Menu)

8-44

OPERATION GUIDE

Correcting Fine Black Lines

Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
optional document processor used.

The table below shows the available settings.

NOTE:

Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to

keep the default ([Off]).

Use the procedure below to specify the setting for correcting fine black lines.

Press the

System Menu

key.

Press [

], [Adjustment/Maintenance] and then [Change] of

Correcting Black Line

Press [Off], [On(Low)] or [On(High)].

Press [OK].

System Initialization

Initialize the hard disk mounted on the machine to return to the default mode.

Refer to

System Initialization on page 8-63

about the initialization procedures.

Display Brightness

Set the brightness of the touch panel.

Use the procedure below to adjust the display brightness.

Press the

System Menu

key.

Paper feed
direction

Item Description

Off

No correction performed.

On(Low)

Correction performed. The reproduction of the image becomes lower when
using Off.

On(High)

Correction performed. Select this item if black streak remains after using On
(Low). The reproduction of the image becomes lower when using On (Low).

Summary of Contents for CD 1242









































































































































































































































































































































































































































Search results

Summary of Contents for CD 1242

Reviews:

Related manuals for CD 1242

Brands by name

Popular brands

Utax CD 1242, Instruction Handbook Manual

Search results

Summary of Contents for CD 1242

Reviews:

Related manuals for CD 1242

Brands by name

Popular brands