manualshive.com logo in svg

Utax CD 1435, User Manual

The Utax CD 1435 is a reliable and efficient office printing solution. With its easy-to-use interface and advanced features, this multifunctional device is a game-changer. Need assistance? Look no further! Download the user manual for free from 88.208.23.73:8080 to unlock the full potential of your Utax CD 1435.

Share
Download
background image

vii

6

The telephone company may make changes in its facilities, equipment, operations or procedures that 
could affect the operation of the equipment. If this happens the telephone company will provide advance 
notice in order for you to make necessary modifications to maintain uninterrupted service.

7

If trouble is experienced with this equipment, please contact the following company for repair and (or) 
warranty information:

If the equipment is causing harm to the telephone network, the telephone company may request that you 
disconnect the equipment until the problem is resolved.

8

This equipment cannot be used on public coin service provided by the telephone company. Connection to 
Party line service is subject to state tariffs. Contact the state public utility commission, public service 
commission or corporation commission for information.

9

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation 
of this equipment does not disable your alarm equipment. If you have questions about what will disable 
alarm equipment, consult your telephone company or a qualified installer.

10

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or 
other electronic device, including FAX machines, to send any message unless such message clearly 
contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, 
the date and time it is sent and an identification of the business or other entity, or other individual sending 
the message and the telephone number of the sending machine or such business, other entity, or 
individual. (The telephone number provided may not be a 900 number or any other number for which 
charges exceed local or long-distance transmission charges.)
In order to program this information into your FAX machine, you should complete the following 
steps:(Insure that it will be transmitted, see 

Local FAX Name Registration on page 6-4

, 

Local FAX 

Information Entry on page 6-4

, 

Date and Time Entry on page 2-4

, and 

Selection of Transmit Terminal 

Identification (TTI) on page 6-3

.)

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk 
of fire, electric shock and injury to persons, including the following:

CAUTION:

 

To reduce the risk of fire, use only No.26 AWG or larger UL listed or CSA certified telecommunication 

line cord.

1

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in 
a wet basement or near a swimming pool.

2

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote 
risk of electric shock from lightning.

3

Do not use the telephone to report a gas leak in the vicinity of the leak.

4

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They 
may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments

Related manuals for CD 1435

QMS 3260 Getting Started Manual preview
3260
Brand: QMS Pages: 86
Panasonic DP-CL21 Series Operating Instructions Manual preview
DP-CL21 Series
Brand: Panasonic Pages: 9
Panasonic DP-CL21 Series Specifications preview
DP-CL21 Series
Brand: Panasonic Pages: 2
F+D Feinwerk- und Drucktechnik TOP-ino Operating Instructions Manual preview
TOP-ino
Brand: F+D Feinwerk- und Drucktechnik Pages: 22
TallyGenicom 6600 Series Quick Reference Manual preview
6600 Series
Brand: TallyGenicom Pages: 310
TallyGenicom 6600 Series Applications Manual preview
6600 Series
Brand: TallyGenicom Pages: 330
TallyGenicom T6212 Operator'S Manual preview
T6212
Brand: TallyGenicom Pages: 92
Xerox WorkCentre 5325 Administrator'S Manual preview
WorkCentre 5325
Brand: Xerox Pages: 160
Xerox WorkCentre 5016 Specification preview
WorkCentre 5016
Brand: Xerox Pages: 2
Xerox WorkCentre 490cx Online User'S Manual preview
WorkCentre 490cx
Brand: Xerox Pages: 258
Xerox WorkCentre 4260 Series System Administration Manual preview
WorkCentre 4260 Series
Brand: Xerox Pages: 210
Xerox WorkCentre 3550 Information Manual preview
WorkCentre 3550
Brand: Xerox Pages: 32
Xerox WorkCentre 3315DN System Administrator Manual preview
WorkCentre 3315DN
Brand: Xerox Pages: 191
Xerox WORKCENTER 5222 Reference Manual preview
WORKCENTER 5222
Brand: Xerox Pages: 28
Xerox VersaLink C71 Series User Documentation preview
VersaLink C71 Series
Brand: Xerox Pages: 247
Xerox VersaLink C7000 Installation Manual preview
VersaLink C7000
Brand: Xerox Pages: 2
Xerox VersaLink C505 Quick Use Manual preview
VersaLink C505
Brand: Xerox Pages: 21
Xerox VersaLink B71 Series User Documentation preview
VersaLink B71 Series
Brand: Xerox Pages: 234

Brands by name

Popular brands

Load more brands