Utax CDC 1930 User Manual Download | Manualshive

Page: 26 / 588

background image

xxiv

Cautions when handling consumables

CAUTION

Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause
burns.

Keep the toner container and the waste toner box out of the reach of children.

If toner happens to spill from the toner container or the waste toner box, avoid inhalation and ingestion,
as well as contact with your eyes and skin.

• If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of

water. If coughing develops, contact a physician.

• If you do happen to ingest toner, rinse your mouth with water and drink 1 or 2 cups of water to dilute the

contents of your stomach. If necessary, contact a physician.

• If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining

tenderness, contact a physician.

• If toner does happen to get on your skin, wash with soap and water.

Do not attempt to force open or destroy the toner container or the waste toner box.

Other precautions

Return the exhausted toner container and waste toner box to your dealer or service representative. The
collected toner container and waste toner box will be recycled or disposed in accordance with the relevant
regulations.

Store the machine while avoiding exposure to direct sunlight.

Store the machine in a place where the temperature stays below 40ºC while avoiding sharp changes of
temperature and humidity.

If the machine will not be used for an extended period of time, remove the paper from the cassette and the Multi
Purpose (MP) Tray, return it to its original package and reseal it.

If the optional Fax kit is installed and the main power switch is off, transmitting/receiving Fax is disabled. Do not
turn off the main power switch, but press the

Power

key on the operation panel to enter Sleep mode.

«
...
24
25
26
27
28
...
»

Summary of Contents for CDC 1930













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CDC 1930

Brand: SPRT Pages: 28

DocuPrint C3055 DX

Brand: Xerox Pages: 20

16C0365 - 5500 MFP

Brand: Lexmark Pages: 88

Brand: Oki Pages: 2

Brand: Canon Pages: 164

Brand: Canon Pages: 2

Brand: Canon Pages: 2

Brand: Canon Pages: 2

Brand: Canon Pages: 8

Brand: Canon Pages: 99

Brand: Canon Pages: 188

Brand: Canon Pages: 2

Brand: Canon Pages: 8

Brand: Canon Pages: 2

Brand: Canon Pages: 116

Brand: Canon Pages: 54

Brand: Canon Pages: 60

Brand: Canon Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands