Default Setting (System Menu)
9-24
Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Use the procedure below to set the default margin width.
1
Press the
System Menu
key.
2
Press [Common Settings], [
], [Next] of
Function Defaults
, [
] and then [Change] of
Margin Default
.
3
Use the [+] or [-] to enter the margin widths for
Left/Right
and
Top/Bottom
.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the available settings.
NOTE:
Refer to
page 4-44
for Auto Image Rotation
.
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the
System Menu
key.
2
Press [Common Settings], [
], [Next] of
Function Defaults
, [
] and then [Change] of
Auto Image Rotation
.
3
Select the default for [Off] or [On].
4
Press [OK].
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
NOTE:
Refer to
page 4-14 for EcoPrint.
Input units
Range
Inch
-0.75 to 0.75" (in 0.01" increments)
Metric
-18 mm to 18 mm (in 1 mm increments)
Item
Description
Off
No Auto Image Rotation performed.
On
Auto Image Rotation performed.
Item
Description
Off
No EcoPrint performed.
On
EcoPrint performed.
Summary of Contents for CDC 1930
