Utax CDC 1930 User Manual Download

Page: 366 / 588

Default Setting (System Menu)

9-60

EcoPrint

EcoPrint conserves toner when printing. This is recommended for test copies where lighter printing is not a
problem.

Use the procedure below to specify the EcoPrint setting.

Press the

System Menu

key.

Press [Printer] and [Change] of

EcoPrint

Press [Off] or [On].

Press [OK].

Toner SaveLevel(EcoPrint)

Select the default Toner SaveLevel(EcoPrint). One of five levels [1] - [5] can be set.

NOTE:

Raising the level reduces toner consumption, but image quality falls.

Use the procedure below to select the default Toner SaveLevel(EcoPrint).

Press the

System Menu

key.

Press [Printer] and [Change] of

Toner SaveLevel(EcoPrint)

Select from [1] to [5] for the default Toner SaveLevel(EcoPrint).

Press [OK].

Override A4/Letter

Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.

Use the procedure below to specify the override A4/Letter setting.

Press the

System Menu

key.

Press [Printer] and [Change] of

Override A4/Letter

Press [Off] or [On].

Press [OK].

Item

Description

A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.

Off

A4 and Letter are not regarded as the same in size.

Summary of Contents for CDC 1930













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CDC 1930

Reviews:

Related manuals for CDC 1930

Brands by name

Popular brands

Utax CDC 1930, User Manual

Search results

Summary of Contents for CDC 1930

Reviews:

Related manuals for CDC 1930

Brands by name

Popular brands