Utax P-4030D User Manual Download

Page: 178 / 312

Operation Panel

4-118

To change the Login User Name

Press





to select

Pressing

[Edit]

(

[Right Select]

). The screen for editing the Login

User Name appears.

Change the Login User Name using the numeric keys and press

[OK]

. The Login User Name screen reappears.

To change the Login Password

Press





to select

Pressing

[Edit]

(

[Right Select]

). The

New Password

screen

appears.

Enter the new password using the numeric keys and press

[OK]

. The

Confirm Password

screen reappears.

To confirm, re-enter the password to be registered. Enter the
Password using the numeric keys.

Press

[OK]

. If the Password matches then the password is changed

to the new one and the

screen reappears.

If the password does not match,

Incorrect password

is displayed

and the

New Password

screen reappears. Enter again from the new

Password.

Detail:

[ Edit ]

Note

Up to 32 characters can be entered. For details on

entering characters, refer to

Character Entry Method on page

A-2

Admin

ABC

[ Text

]

Note

Up to 64 characters can be entered. For details on

entering characters, refer to

Character Entry Method on page

A-2

Detail:

3/ 5



[ Edit ]

New Password:

ABC

[ Text

]

Confirm Password:

ABC

[ Text

]

Summary of Contents for P-4030D

























































































































































































































































































































Search results

Summary of Contents for P-4030D

Reviews:

Related manuals for P-4030D

Brands by name

Popular brands

Utax P-4030D, User Manual

Search results

Summary of Contents for P-4030D

Reviews:

Related manuals for P-4030D

Brands by name

Popular brands