Utax P-4531DN Operation Manual Download

Page: 190 / 352

Operation Panel

4-112

WeeklyTimer Set. (WeeklyTimer Settings)

Configure settings for switching the machine to OFF and waking it automatically at a specified time for each day of the week.

The options available in the WeeklyTimer Set. are as follows:

• Weekly Timer (Weekly Timer settings)...4-112
• Schedule (Schedule settings)...4-112
• Retry Settings (Retry Settings)...4-114

In the

Timer Setting

menu, press





to select

WeeklyTimer

Set.

Press

[OK]

. The

WeeklyTimer Set.

menu screen appears.

Weekly Timer (Weekly Timer settings)

Select whether to use Weekly Timer.

In the

WeeklyTimer Set.

menu, press





to select

Weekly

Timer

Press

[OK]

. The

Weekly Timer

screen appears.

Press





to select

Off

Press

[OK]

. The Weekly Timer is set and the

WeeklyTimer Set.

menu reappears.

Schedule (Schedule settings)

Set the schedule for machine power off and on.

The options available in the WeeklyTimer Set. are as follows:

• Schedule (Schedule settings)...4-112
• Power On (Power On settings)...4-113
• Power Off (Power Off settings)...4-113

Schedule (Schedule settings)

Specify the time for each day of the week at which the machine turns OFF.

In the

WeeklyTimer Set.

menu, press





to select

Schedule

Press

[OK]

. The

Schedule

screen appears.

Press





to select the day of the week you want to set.

WeeklyTimer Set.:

Retry Settings

Exit

Schedule

Weekly Timer

Weekly Timer:

Off

Schedule:

Tuesday

Monday

Wednesday

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands